Sound Devices A20-QuickDock

OVERVIEW

The A20-QuickDock simplifies the process of docking the A20-Nexus to an 833, 888, or Scorpio mixer/recorder. The bottom panel includes a multi-pin port that provides quick and convenient power, audio, and timecode connection without the need for any additional cables. This also allows for seamless integration of the A20-Nexus with the 8-Series, enabling users to easily take advantage of its advanced features and capabilities. With the A20-QuickDock, connecting and disconnecting the A20-Nexus is quick and effortless, making it possible to mount the receiver remotely whenever desired. This makes it easier than ever to connect the A20-Nexus to the 8-Series, allowing for seamless integration and enhanced functionality. This accessory also allows the A20-Nexus to quickly and easily connect and disconnect from the 8-Series without the need for any tools, making it possible to mount the receiver remotely whenever desired.

DOCKING THE A20-NEXUS & A20-NEXUS-GO ON 8 SERIES

• The 8-Series must provide power – the A20-Nexus’ power inputs (TA4 and PoE+) are disabled.
• The A20-Nexus rear panel connectors are mostly disabled apart from the antenna connectors, the USB-A port and the Ethernet ports.
• When docked to an 8-Series, the A20-Nexus Ethernet ports can only be used for control, not Dante.

SPECIFICATIONS

• H x W x D
  • 2.1 cm x 20.6 cm x 15.1 cm
  • 0.81 in x 8.11 in 5.93 in
• Weight
  • 0.23 kg (unpackaged)
  • 0.50 lbs (unpackaged)
  • 0.44 kg (packaged)
  • 0.98 lbs (packaged)
• Height added to the 8-Series and A20-Nexus rig
  • 1.1 cm added height
  • 0.42 in added height

A20-QuickDock KIT INCLUDES

• Mounting plate with detachable Quick Release mechanism and multi-pin connector.
• 2 mm and 1/16” allen keys.
• Four 1/16” allen screws for securing the mounting plate to the bottom of the A20-Nexus.
• Three long and two short mounting pillars for securing the A20-Nexus to the top of the 8-Series.