fbpx

Bubblebee Industries “THE SPACER BUBBLE” (BLACK)

$285.00

 

✔️ Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom ‘swoosh’ and wind.

✔️ Specially designed rubber base for super easy and secure mounting.

✔️ Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible.

✔️ Slip-on fur made from Bubblebee Industries’ best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection.

✔️ Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally.


THE SPACER BUBBLE GIVES YOU THE RIGHT BALANCE BETWEEN WIND-PROTECTION AND AUDIO TRANSPARENCY IN CHANGING CONDITIONS

The Spacer Bubble, Black is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A Short-Haired fur cover is available separately if you need it.


The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom.

The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds.

When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready!

The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you’re working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency.

WHAT’S INCLUDED?

1x The Spacer Bubble, Black
1x The Long-Haired Spacer Cover, Black
1x Mesh Storage Bag, Black

VIDEOS

WHICH SPACER BUBBLE SIZE?

We offer five different lengths and two different mount sizes:


Weight XS:
Mesh base: 1,4oz (40g)
Long-haired slip on fur: 0,7oz (20g)
Full weight w/ packaging: 9,1oz (260g)


Weight S:
Mesh base: 1,7oz (50g)
Long-haired slip on fur: 0,8oz (25g)
Full weight w/ packaging: 9,7oz (275g)

Weight M:
Mesh base: 1,9oz (55g)
Long-haired slip on fur: 1oz (30g)
Full weight w/ packaging: 10,2oz (290g) 


Weight L:
Mesh base: 2,1oz (60g)
Long-haired slip on fur: 1,7oz (50g)
Full weight w/ packaging: 10,5oz (300g)


Weight XL:
Mesh base: 2,2oz (65g)
Long-haired slip on fur: 1,7oz (50g)
Full weight w/ packaging: 10,7oz (305g)


Big Mount:  


Weight XS Big Mount:
Mesh base: 1,4oz (40g)
Long-haired slip on fur: 0,7oz (20g)
Full weight w/ packaging: 9,1oz (260g)


Weight XL Big Mount:
Mesh base: 2,2oz (65g)
Long-haired slip on fur: 1,7oz (50g)
Full weight w/ packaging: 10,7oz (305g)

Select Size

XS, XS-B, S, M, L, XL, XL-B

Reviews

There are no reviews yet.

Be the first to review “Bubblebee Industries “THE SPACER BUBBLE” (BLACK)”

Your email address will not be published. Required fields are marked *

Copyright ©2024 AKA Pro Audio NZ Limited. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio NZ Limited. All rights reserved. | Privacy Policy | Terms of Use