YOUR LAVALIER MIC’SBEST FRIEND ON WINDY DAYS
Bubblebee Industries Windbubble microphone windshield consists of an outer shell of the finest imitation fur, and an inner core of nothing. This ‘nothing‘ is exactly what makes the bubble so special. That is to say, air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So, instead of the wind hammering on the microphone and making those horrible, ‘I’m in the middle of a hurricane’ sounds, the capsule is protected from the wind in a calm bubble, and allowed to perform at its best.
Windbubble Size Guide
Undoubtedly, Bubblebee Windbubbles will give you the best wind protection you can get for your lavalier mic. Whatever the make, shape, or size of it, Bubblebee Industries have made a furry Windbubble to fit, consequently keeping the wind out, and the clean, clear sound frequencies in.
Altogether, there are four sizes, with the internal ‘Bubble of dead air’, where the opening and length of fur increases progressively with each step. If your mic fits in more than one, for example, the DPA 4060 which fits with both sizes 2 and 3, you will achieve greater wind resistance with the “larger” Windbubble because of the longer fur, although, this will in turn compromise a little on visibility.
SIZE 1For mics with a ⌀ of |
SIZE 2For mics with a ⌀ of |
SIZE 3For mics with a ⌀ of |
SIZE 4For mics with a ⌀ of |
|
DPA Microphones |
6060/61 | 4060 / 61 / 62 / 63 4071 |
4060 / 61 / 62 / 63 4071 |
4071 with mesh windscreen (DUA0572) |
Sanken |
COS-11 without mesh windscreen |
COS-11 without mesh windscreen | COS-11 with mesh windscreen (WS-11) | COS-11 with mesh windscreen (WS-L-11) |
Countryman |
B6, B2D, E6 | B3 | EMW | EMW |
Sennheiser |
MKE 1 | MKE 2, MKE 1 with mesh windscreen (MZW01), ME2-US without mesh windscreen |
MKE 2, ME2-US without mesh windscreen |
MKE 2 with mesh windscreen (MZW-A) ME2-II, ME 4, ME 102 & ME 104 with mesh windscreen (MZW 2), ME2-US with windscreen |
Reviews
There are no reviews yet.