fbpx

DPA AIR1 Fur Windscreen

$95.00

The DPA AIR1 is a unique windscreen for lavalier and headset mics. It fits on any round omnidirectional miniature mics between Ø2.5-5.8 mm (0.1-0.23 in).


✔️ Efficient and consistent wind protection

✔️Swift and effortless mounting

✔️Complete acoustical transparency

✔️Six color options

✔️Fits most major brands’ professional miniature mics


   

 

 

SKU: DPA-AIR1-XXXXX-X Categories: , Tags: , , , ,

Two Layers of Wind Protection

The DPA AIR1 Fur Windscreen offers two layers of protection. The first layer of protection is a newly-designed acoustic fur. The synthetic hair type, length and density makes the windscreen significantly smaller than most, without sacrificing wind rejection effectiveness.

The second layer of protection is the air cavity created in front of the microphone. Two sturdy arches keep the fur spaced away from the mic and maintain constant air volume. In addition, there is a mic stop to ensure that the microphone holds its position at the most protected point inside the windscreen – the acoustic sweet spot.

Easy to Mount

The DPA AIR1 was designed for quick and easy mounting, even in difficult weather situations.

The hard plastic construction is robust with handles that are strong and easy to use, from the first to the last time. Thus, ensuring it is properly positioned and securely fixed in the acoustic sweet spot. Inserting the microphone into the windscreen is quick and easy because of its large opening, strong clasp, and mic stop.

No sacrificing intelligibility for protection

With consistent positioning and efficient wind protection taken care of, acoustical transparency can be achieved. Due to its nature, all acoustic fur attenuates certain frequencies. AIR1 has a built-in boundary surface that boots the frequencies attenuated so that the audio captured is completely intelligible and sounds as if no wind protection is being used (minus that troublesome wind noise of course).

Compatible Mics

AIR1 fits on any round omnidirectional miniature mic between Ø2.5-5.8 mm (0.1-.23 in).

  • AIR1 Small for mic diameter 2.5-4.3 mm (0.10-0.17 in) 
  • AIR1 Large for mic diameter 4.3-5.8 mm (0.17-0.23 in)

The small size has a red spring, and the large has a silver spring.

The table below shows an overview of the most popular professional miniature microphones and the recommended AIR1 size variant:

Colours

The AIR1 is available in the following colours:

Beige

Black

Brown

Grey

Off White

White

What’s in the Box?

2x AIR1 in the same size & colour.

Select Size

S, L

Select Colour

Beige, Black, Brown, Grey, Off-White, White

Copyright ©2024 AKA Pro Audio NZ Limited. All rights reserved. | Privacy Policy | Terms of Use
© 2024 AKA Pro Audio NZ Limited. All rights reserved. | Privacy Policy | Terms of Use